Fuel Pump Control Circuit

FUEL PUMP CONTROL CIRCUIT

CIRCUIT DESCRIPTION

Fuel Pump Circuit Schematic:

The fuel pump is switched ON (low voltage at terminal FC) when STA is ON or while the NE signal is input to the ECM.
In the wiring diagram above, when the engine is cranking, current flows from terminal ST of the ignition switch to the starter relay coil. The starter relay switches ON and current flows to coil L1 of the circuit opening relay. The circuit opening relay switches ON supplying power to the fuel pump and the fuel pump operates.
When the STA signal and NE signal are input to the ECM, Tr is turned ON, current flows to coil L2 of the circuit opening relay, the relay switches ON and the fuel pump operates.
While the NE signal is generated (engine running), the ECM keeps Tr ON (circuit opening relay ON) and the fuel pump also keeps operating.

WIRING DIAGRAM

Fuel Pump Control Circuit:

INSPECTION PROCEDURE
With TOYOTA hand-held tester

































INSPECTION PROCEDURE
With OBDII scan tool (excluding TOYOTA hand-held tester)