Component Tests and General Diagnostics
CRANKSHAFT POSITION SENSOR INSPECTIONNOTICE:"Cold" and "Hot" in the following sentences express the temperature of the sensor itself.
Cold is from -10°C (140° F) to 50°C (122°F)
Hot is from 50°C (122°F) to 10O°C (212°F)
1. REMOVE CRANKSHAFT POSITION SENSOR.
- Remove RH fender apron seal
- Remove the bolt and disconnect the crankshaft position sensor.
- Disconnect the crankshaft position sensor connector.
2. INSPECT CRANKSHAFT POSITION SENSOR RESISTANCE.
- Using an ohmmeter, measure the resistance between terminals.
Cold: 1,630 - 2,740 0hms
Hot: 2,060 - 3,225 0hms
- If the resistance is not as specified, replace the crankshaft position sensor
3. REINSTALL CRANKSHAFT POSITION SENSOR.
- Installation is the reverse of removal.
Torque: 8 Nm (80 kg.cm, 69 in.lb)
see also: DTC P0335 under the "Trouble Code Charts".