Manual Shifting Test

MANUAL SHIFTING TEST
With this test, it can be determined whether the trouble is within the electrical circuit or is a mechanical problem in the transaxle.




1. DISCONNECT SOLENOID WIRE
2. INSPECT MANUAL DRIVING OPERATION
- Check that the shift and gear positions correspond with the table below.




HINT: If the gear positions L, 2 and D position are difficult to distinguish, do the following road test.
- While driving, shift through the L, 2 and D positions. Check that the gear change corresponds to the shift position.

- If any abnormality is found in the above test, the problem is in the transaxle itself.

3. RECONNECT SOLENOID WIRE
4. CLEAR THE DTC SET BY THE TEST PROCEDURE