Manual Shifting Test
MANUAL SHIFTING TESTWith this test, it can be determined whether trouble is within the electrical circuit or is a mechanical problem in the transaxle.
1. DISCONNECT SOLENOID WIRE.
2. INSPECT MANUAL DRIVING OPERATION.
- Check that the shift and gear positions correspond with the table below.
Manual Shifting Test Results:
- If the L, 2 and D position gear positions are difficult to distinguish, do the following road test.
- While driving, shift through the L, 2 and D positions. Check that the gear change corresponds to the shift position.
- If any abnormality is found in the above test, the problem is in the transaxle itself.
3. CONNECT SOLENOID WIRE.
4. CANCEL OUT DIAGNOSTIC TROUBLE CODE.