Fuel Pump Relay: Testing and Inspection

1. REMOVE CIRCUIT OPENING RELAY.

2. INSPECT CIRCUIT OPENING RELAY.
A. Inspect relay continuity.



- Using an ohmmeter, check that there is continuity between terminals 86 and 85.
- Check that there is no continuity between terminals 87 and 30.
- If continuity is not as specified, replace the relay.

B. Inspect relay operation.



- Apply battery positive voltage across terminals 86 and 85.
- Using an ohmmeter, check that there is continuity between terminals 87 and 30.
- If operation is not as specified, replace the relay.

3. REINSTALL CIRCUIT OPENING RELAY.