Catalytic Converter: Service and Repair

CONVERTER REMOVAL
- Jack up the vehicle.
- Check that the converter is cool.



- Remove the 2 bolts and exhaust pipe clamp.

Torque: 29 Nm (22 ft.lb)

- Remove the 2 bolts, and disconnect the bracket.

Torque: 19 Nm (14 ft.lb)

- Remove the 2 bolts and 2 nuts holding the front exhaust pipe to the center exhaust pipe.

Torque: 56 Nm (41 ft.lb)

- Remove the 4 nuts holding the front exhaust pipe to the exhaust manifolds.

Torque: 62 Nm (46 ft.lb)

- Remove the front exhaust pipe and 3 gaskets.

- Reverse procedure to re-install.