Vehicle Speed Sensor: Testing and Inspection

Location Of Speed Sensor No. 1:

TESTING SPEED SENSOR # 1 (IN COMBINATION METER)
1. Remove the combination meter.
2. Connect an ohmmeter between terminals A and B.
3. Revolve the meter shaft and check that the meter needle repeatedly deflects from 0 to Infinity Ohms.

Testing Speed Sensor No. 2:

TESTING SPEED SENSOR # 2 (IN TRANSAXLE)
1. Jack up one of the front wheels.
2. Connect an ohmmeter between the terminals.
3. Spin the wheel and check that the meter needle deflects from 0 to Infinity Ohms.