Shift Position Signal

SHIFT POSITION
1. Warm up the engine.

Coolant temperature: 80°C (176°F)




2. Turn the O/D switch to"ON".
3. Place the shift lever into the D position.

4. During a road test (above 10 km/h or 6 mph) check that voltage at the TT terminal is as indicated below for each up-shift position.
If the voltage rises from 0 volts to 7 volts in the sequence shown, the control system is okay.




The chart shows the voltmeter reading and corresponding gears.

HINT: Determine the gear position by a light shock or change in engine RPM when shifting.