Throttle Position Sensor: Adjustments

THROTTLE POSITION SENSOR ADJUSTMENT



- Loosen the 2 set screws of the sensor.
- Apply vacuum to the throttle opener.
- Insert a 0.6O mm (0.024 in.) feeler gauge between the throttle stop screw and stop lever.



- Connect the tester probe of an ohmmeter to the terminals IDL and E2 of the sensor.



- Gradually turn the sensor clockwise until the ohmmeter deflects, and secure it with the 2 set screws.



- Recheck the continuity between terminals IDL and E2.

IDL - E2 Continuity Values: