Restraint Systems

DIAGNOSTIC TROUBLE CODES

HINT:
- When the SRS warning light remains lit up and the diagnostic trouble code in the normal code, this means a source voltage drop. This malfunction is not stored in memory by the center airbag sensor assembly and if the power source voltage returns to normal, the SRS warning light will automatically go out.

- If an open malfunction occurs in the SRS warning light system, the SRS warning light does not light up so that until the malfunction is repaired, the diagnosis trouble code cannot be confirmed.

- When 2 or more codes are indicated, the lowest numbered code will appear first.

- If a code not listed on the chart is displayed, then the center airbag sensor assembly is faulty.







DIAGNOSTIC TROUBLE CODE MATRIX CHART

If a malfunction code is displayed during the diagnostic trouble code check, check the circuit listed for that code in the table below (Proceed to the page given for that circuit).

HINT: When the SRS warning light remains lit up and the diagnostic trouble code is the normal code, this means a source voltage drop.