Shift and Select Lever Shaft Disassembly

1. REMOVE CONTROL SHIFT LEVER, DUST BOOT AND CONTROL SHAFT COVER
a. Remove the nut and washer.
b. Remove the lever lock pin.
c. Remove the control shift lever.
d. Remove the dust boot.
e. Remove the control shaft cover.




2. REMOVE SELECT SPRING SEAT NO.2 AND SHIFT INNER LEVER NO.2
a. Using a screwdriver, pry out the E-ring.




b. Remove the reverse restrict pin holder, spring and shift inner lever No.2.




3. REMOVE SHIFT INTERLOCK PLATE, SHIFT INNER LEVER NO.1 AND SELECT SPRING SEAT
a. Using a pin punch and hammer, drive out the slotted spring pin.




b. Remove the shift interlock plate, shift inner lever No.1 and select spring seat.




4. REMOVE E-RING FROM SHIFT AND SELECT LEVER SHAFT
Using a screwdriver, pry out the E-ring.