California Models Only
COMPONENTS FOR DISASSEMBLY AND ASSEMBLYExploded View Of Distributor Components:
DISTRIBUTOR DISASSEMBLY
1. Remove distributor cap.
Distributor Cap Screws:
- Remove the 2 bolts, distributor cap and packing.
2. Remove rotor.
Rotor Screws:
- Remove the 2 screws and rotor.
DISTRIBUTOR INSPECTION
1. Inspect shaft
- Turn the shaft and check that it is not rough or worn. If it feels rough or worn, replace the distributor housing assembly.
See also Testing and Inspection Procedures
California Vehicles
DISTRIBUTOR ASSEMBLY
1. Install rotor
Align The Signal Generator Rotor With The Ignition Rotor:
(a) Align the hollow of the signal rotor with the protrusion of the rotor.
Rotor Screws:
(b) Install the rotor with the 2 screws.
2. Install distributor cap.
(a) Install a new packing to the distributor housing.
Distributor Cap Screws:
(b) Install the distributor cap with the 2 bolts.