Speed Sensor

6. READ DIAGNOSTIC TROUBLE CODE









(a) Using SST, connect the terminals Tc to E1 of the data link connector 1. SST 09843-18020

HINT: Do not disconnect the terminal Ts to E1.






(b) Read the number of blinks.
(See DIAGNOSTIC TROUBLE CODE DESCRIPTIONS)

HINT: The first number of blinks will equal the first digit of a two digit diagnostic trouble code. After a 1.5 second pause, the 2nd number of blinks will equal the 2nd number of a two digit code. If there are two or more codes, there will be a 2.5 second pause between each code, and then indication will begin again after a 4.0 second pause, continuing in order from the smaller value up to the larger one.