Disassembly of Shift and Select Lever Shaft

1. REMOVE NO.2 SHIFT INNER LEVER
a. Using a pin punch and hammer, drive Out the slotted spring pin.




b. Using two screwdrivers and a hammer, remove the snap ring.
c. Remove the No.2 select spring seat, No.2 compression spring and No.2 shift inner lever.




2. REMOVE SHIFT INTER PLATE AND NO.1 SHIFT INNER LEVER
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Remove the shift inter plate and No.1 shift inner lever.




3. REMOVE SELECT INNER LEVER
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Remove the select inner lever, No.1 compression spring and No.1 select spring seat.




4. REMOVE SNAP RING
Using two screwdrivers and a hammer, remove the snap ring.