Assembly of Shift and Select Lever Shaft

1. COAT SHAFT WITH MP GREASE, AS SHOWN




2. INSTALL SNAP RING
Using a plastic hammer, install the snap ring.




3. INSTALL SELECT INNER LEVER
a. Install the No.1 select spring seat, No.1 compression spring and select inner lever.




b. Using a pin punch hammer, drive in the slotted spring pin.




4. INSTALL SHIFT INTERLOCK PLATE AND NO.1 SHIFT INNER LEVER
a. Install the shift interlock plate No.1 shift inner lever.




b. Using a pin punch and hammer, drive in the slotted spring pin.
c. Check that the shift interlock plate turn smoothly.




5. INSTALL NO.2 SHIFT INNER LEVER
a. Install the No.2 shift inner lever, No.2 compression spring and No.2 select spring seat.




b. Using a screwdriver and hammer, install the snap ring.




c. Using a pin punch and hammer, drive in the slotted spring pin.