Spark Plug: Service and Repair

- Remove V Bank Cover - using a 5 mm hexagon wrench, remove the two nuts and the V Bank Cover.






- Remove ignition wires from spark plugs.

Spark Plug Removal:

- Using a 16 mm spark plug socket, remove spark plugs from cylinder head.
- Using a suitable gapping tool, adjust spark plug gap.

Spark Plug Gap: 0.043 in (1.1 mm)

- Apply a light coat of anti-seize compound to threads of spark plugs.
- Using a 16 mm spark plug socket, install spark plugs.

Torque Value: 13 ft.lb (18 Nm)

- Reconnect spark plug wires to the appropriate spark plug. Ensure proper firing order.

Firing Order: 1 2 3 4 5 6

- Reinstall V Bank Cover - using a 5 mm hexagon wrench, reinstall the two nuts and the V Bank Cover.