Transmission Speed Sensor: Service and Repair

REMOVAL OF SPEED SENSOR




1. (A241E/4A-GZE)
REMOVE INTERCOOLER
Disconnect the two hose clamps, and remove the four bolts and intercooler.




2. REMOVE AIR FLOW METER AND AIR CLEANER HOSE
3. DISCONNECT SPEED SENSOR CONNECTOR




4. REMOVE RETAINING PLATE
5. REMOVE SPEED SENSOR AND O-RING

INSPECTION OF SPEED SENSOR




INSPECT SPEED SENSOR
a. Connect an ohmmeter between the terminals.
b. Bring a magnet close to then away from the sensor tip and check that the meter needle deflects from 0 ohm to infinity ohms.

INSTALLATION OF SPEED SENSOR




1. INSTALL AND COAT NEW O-RING WITH ATF
2. INSTALL SPEED SENSOR
3. INSTALL RETAINING PLATE
4. CONNECT SPEED SENSOR CONNECTOR




5. INSTALL AIR FLOW METER AND AIR CLEANER HOSE




6. (A241E/4A-GZE)
INSTALL INTERCOOLER
Connect the two hose clamps, and install the four bolts and intercooler.