Disassembly of Valve Body Assembly

COMPONENTS





DISASSEMBLY OF VALVE BODY



1. REMOVE NO.1 SOLENOID
Remove the one bolt and the solenoid.
2. REMOVE NO.2 SOLENOID
Remove the two bolts and the solenoid.




3. REMOVE LOWER VALVE BODY COVER
a. Remove the ten bolts.
b. Remove the cover and the gasket.




4. TURN ASSEMBLY OVER AND REMOVE TWELVE BOLTS FROM UPPER VALVE BODY AND UPPER VALVE BODY COVER




5. REMOVE UPPER VALVE BODY COVER, STRAINER, GASKETS AND PLATE




6. TURN ASSEMBLY OVER AND REMOVE THREE BOLTS FROM LOWER VALVE BODY




7. LIST OFF LOWER VALVE BODY AND PLATE AS SINGLE UNIT
Hold valve body plate to lower valve body.

NOTE: Be careful that the check valve and balls do not fall out.




8. WATCH FOR STEEL BALLS, RETAINERS AND PINS IN VALVE BODY