Installation

INSTALLATION






1. INSTALL COLD START INJECTOR.
Install a new gasket and the injector with the two bolts.

Torque: 95 kg-cm (82 in-lb, 9.3 N.m)






2. INSTALL COLD START INJECTOR PIPE.
Install the injector pipe with new four gaskets and the two union bolts.

Torque: 180 kg-cm (13 ft-lb, 18 N.m)

3. CONNECT COLD START INJECTOR CONNECTOR.

4. CONNECT CABLE TO NEGATIVE TERMINAL OF BATTERY.

5. CHECK FOR FUEL LEAKAGE.