Transmission Speed Sensor: Service and Repair

REMOVAL OF SENSOR ROTOR
1. REMOVE EXTENSION HOUSING
2. REMOVE SPEEDOMETER DRIVE GEAR



a. Using snap ring pliers, remove the snap ring.
b. Side off the speedometer gear.
c. Remove the lock ball.




3. REMOVE SENSOR ROTOR FROM OUTPUT SHAFT

INSTALLATION OF SENSOR ROTOR




1. INSTALL SENSOR ROTOR ON OUTPUT SHAFT
a. Make sure that the key is installed in the groove.
b. Install the sensor rotor on the shaft.




2. INSTALL SPEEDOMETER DRIVE GEAR
a. Slide the lock ball and the speedometer gear on the shaft.
b. Using snap ring pliers, install the outer snap ring.
3. INSTALL EXTENSION HOUSING