Installation of Manual Valve Lever and Shaft

INSTALLATION OF MANUAL VALVE LEVER AND SHAFT
1. INSTALL MANUAL VALVE SHAFT INTO CASE



(a) Assemble a new collar to the manual valve lever




(b) Install the manual valve shaft to the transmission case through the manual valve lever.




(c) Drive in the roll pin with the slot at a right angle to the shaft.




(d) Match the collar hole to the lever calking hollow and calk the collar to the lever.




2. INSTALL RETAINING SPRING




3. MAKE SURE THAT LEVER MOVES SMOOTHLY
4. INSTALL PARKING LOCK ROD
5. INSTALL PARKING LOCK PAWL BRACKET
6. INSTALL VALVE BODY