Overdrive Case
DISASSEMBLY OF OVERDRIVE CASE1. REMOVE ACCUMULATOR PISTON OF OVERDRIVE CLUTCH
(a) Remove the snap ring, retaining plate and springs.
(b) Remove the overdrive clutch.
2. REMOVE THE TWO OIL SEAL RINGS FROM CASE
Spread the rings apart and remove them.
ASSEMBLY OF OVERDRIVE CASE
1. INSTALL THE TWO OIL SEAL RINGS ON OVERDRIVE CASE
Spread the rings apart and install them into the groove.
NOTE: After installing the oil seal rings, check that they move smoothly.
2. INSTALL ACCUMULATOR PISTON OF OVERDRIVE CLUTCH
(a) Install the accumulator piston.
(b) Install the piston springs, retaining plate and snap ring.