Headlamp: Testing and Inspection

INSPECTION OF HEADLIGHT RETAINER RELAY
1. INSPECT HEADLIGHT CIRCUIT OPERATION





Connect the positive (+) leads from the battery to terminals 4 and 7. Connect the negative (-) lead to terminal 2. Connect the 3.4W test bulb between terminal 8 and positive (+) lead from the battery.
(a) Disconnect the positive (+) lead from the terminal 7.
Check that the test bulb is lighting.





(b) Connect the negative (-) lead to the terminal 6.
Check that the test bulb does not light.

If operation is not as specified, replace the relay.

2. INSPECT TAILLIGHT CIRCUIT OPERATION





Connect the positive (+) leads from the battery to termij nals 4 and 7. Connect the negative (-) lead to terminal 3. Connect the 3.4W test bulb between terminal 1 and positive (+) lead from the battery.

(a) Disconnect the positive (+) lead from the terminal.
Check that the test bulb is lighting.





(b) Connect the negative (-) lead to the terminal 6.
Check that the test bulb does not light.

If operation is not as specified, replace the relay.