Doors - Striker Adjustment

REFERENCE BODY
NUMBER 003/4445
DATE 12-10-82
MODEL MX, RA. MA

DOOR STRIKER MOUNTING PLATE:

DOOR STRIKER ADJUSTMENT 1981, 1982 MX AND 1982 RA, MA

The current models of Celica, Supra and Cressida are now equipped with a new type of door striker mount, (See illustration.) This type of mount gives the appearance that the striker is in a fixed position, however, adjustment is possible by bending the mount using the following procedure.

^ Loosen the striker mounting screws (approximately 1 turn).

^ Force the striker in the direction required (See Footnote).

For inboard adjustment: Using a soft-faced mallet, drive the striker inward to the desired position. Be sure to adequately protect the painted surfaces to avoid damage.

For outboard adjustment: Use a suitable prybar to force the striker outward to the desired position. Be sure to use a small piece of wood or other suitable material to pry against to avoid damage to the vehicle body.

^ Retighten mounting screws and check adjustment. Repeat, if necessary.

Footnote:

The Celica & Supra striker will adjust approximately 4 mm total. The Cressida striker will adjust approximately 6 mm total.