"Air Bag" Warning Lamp Cannot Indicate Flashing
"AIR BAG" Warning Lamp Cannot Indicate FlashingWiring Diagram:
Wiring Diagram
CAUTION:
- Be sure to perform Air Bag Diagnostic System Check: Except Advanced Air Bag before starting diagnosis according to flow table.
- When measurement of resistance or voltage is required in this flow, use a specified digital multimeter (Refer to Special Tool: Except Advanced Air Bag.) along with a correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is required, refer to Inspection of Intermittents and Poor Connections: Except Advanced Air Bag.
- If there is open circuit in the air bag wire harness, connector or terminal is found damaged, replace the wire harness, connector and terminal as an assembly.
Flow Test Description
Step 1: Check for loose connection between diagnosis switch terminal and ground terminal by service wire.
Step 2: Check for open circuit in diagnosis switch circuit.
Step 1-2:
Troubleshooting
NOTE: Upon completion of inspection and repair work, perform the following items.
- Reconnect all air bag system components, ensure all components are properly mounted.
- Repeat Air Bag Diagnostic System Check: Except Advanced Air Bag to confirm that the trouble has been corrected.