Shifter A/T: Service and Repair

Shift Control Lever Assembly Removal
1. Disconnect the negative battery cable.
2. Remove the floor console.





3. Disconnect the electrical switch connectors.
4. Remove the shift control cable adjuster pinch nut.
5. Loosen the nut from the shift control cable mounting bracket on the shift control assembly.





6. Remove the cable from the bracket.
7. Remove the bolt holding the shift control assembly to the floor panel.





8. Remove the shift control assembly.

Shift Control Lever Assembly Installation





1. Install the bolts and the shift control assembly.
Tighten: Tighten the bolts to 8 Nm (71 inch lbs.).
2. Install the shift control cable onto the bracket and tighten the nut.





3. Install the shift control cable adjuster pinch nut.
Tighten: Tighten the shift control cable adjuster pinch nut to 8 Nm (71 inch lbs.).
4. Connect the electrical switch connectors.
5. Install the floor console.





6. Connect the negative battery cable.