Sunroof / Moonroof Switch: Service and Repair

Power Sunroof Control Switch Removal and Installation

Power Sunroof Control Switch Removal

1. Disconnect the negative battery cable.
2. Pry off the interior courtesy lamp lens.
3. Remove the screws and the switch.




4. Disconnect the electrical connector.

Power Sunroof Control Switch Installation

1. Connect the electrical connector.

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

2. Install the sunroof control switch with the screws.

Tighten:
Tighten the power sunroof control switch screws to 2 N.m (18 lb.in).

3. Install the interior courtesy lamp lens.




4. Connect the negative battery cable.