Front Bumper Impact Bar

Front Bumper Impact Bar

Removal

1. Remove the front bumper fascia.
2. Remove the front bumper energy absorber.
3. Disconnect the electrical connector.
4. Remove the bolts and the front bumper impact bar.







Installation

CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.

1. Install the front impact bar with the bolts.

Tighten:
Tighten the front impact bar bolts to 39 N.m (29 lb-ft).

2. Connect the electrical connector.
3. Install the front bumper energy absorber.
4. Install the front bumper fascia.