Air Bag Systems

"AIR BAG" Warning Lamp Circuit Failure:

CAUTION:
- When measurements are requested use specified digital multimeter with correct terminal adapter from special tool (Connector test adapter kit).
- When a check for proper connection is requested, refer to "Inspection of Intermittent and Poor Connections".
- When an open in air bag wire harness, damaged wire harness, connector or terminal is found, replace wire harness, connectors and terminals as an assembly.

DTC Will Set When:
The output voltage at the "AIR BAG" warning lamp circuit terminal "Q06-12" does not match the commanded state of the warning lamp driver for specified time.

Step 1: