Passenger Air Bag (Inflator) Module

WARNING:
- Never attempt to disassemble or repair the passenger air bag (inflator) module. If any abnormality if found, be sure to replace it with new one as an assembly.
- Be sure to read "Precautions on Service and Diagnosis of Air Bag System" before starting to work and observe every precaution during work. Neglecting them may result in personal injury or undeployment of the air bag when necessary.
- Never measure resistance of passenger air bag (inflator) module or disassemble it. Otherwise, personal injury may result.

CAUTION: If air bag (inflator) module was dropped from a height of 91.4 cm (3 ft) or more, it should be replaced.




Check air bag (inflator) module appearance visually for the following symptoms and if any one of them is applicable, replace with a new one.
- Air bag has deployed.
- There is a crack in trim cover (1) (pad surface).
- Wire harness or connector (3) is damaged.
- Air bag (inflator) module is damaged or a strong impact (e.g., dropping) was applied to it.