Countershaft Bearings

REMOVAL





1. Remove snap rings by using a screwdriver.





2. Remove backing plate (rear cover side).
3. Remove front and rear counter shaft bearings.
a. Using special tools (Bearing remover and sliding shaft), remove bearing.
b. Remove other side of bearing in the same way.
Special Tool
(A): 09941-64511
(B): 09930-30102

INSTALLATION





1. Install countershaft bearing (Roller bearing) to case.
Use special tools (Bearing installer attachment and installer handle).
The bearing installer attachment has two sides.
Use small side A for installation of countershaft bearings.
Special Tool
(A): 09924-74510
(B): 09926-88310





2. Install snap ring.
3. Install countershaft spacer to case.
4. Install another countershaft bearing (ball bearing) to case. Use special tools (Bearing installer attachment and installer handle).
5. Install bearing backing plate and snap ring.