Left Case

LEFT CASE





1. If input oil gutter has been removed, install it with bolt applied with thread lock cement.
"A": Thread lock 1322, 99000-32110
Tightening Torque
(a): 10 Nm (1.0 kg-m, 7.5 ft. lbs.)





2. Install differential side L oil seal until it becomes flush with case surface by using special tool with hammer, and then apply grease to its lip.

NOTE: Face oil seal spring side inward.

"B": SUZUKI SUPER GREASE A, 99000-25010
Special Tool
(A): 09913-75510
3. Install countershaft L bearing cup into case bore by tapping it with plastic hammer lightly.