DLC - OBDII Configuration Changed from 12 to 16 Pin
TSB No. TS 016 03296Section Title: All Models
Division: Automotive
Category: Technical
SUBJECT:
TECH-1A ADAPTER FOR 16-PIN DATA LINK CONNECTOR (DLC)
MODEL:
^ ALL 1995-1996 PRODUCTION X-90'S
^ DECEMBER 1995 PRODUCTION AND LATER SIDEKICKS
^ JANUARY 1996 PRODUCTION AND LATER ESTEEMS
^ JANUARY 1996 PRODUCTION AND LATER SWIFTS
CONDITION:
Data Link Connector (DLC) pin configuration has been changed from a 12 pin to a 16 pin connector.
CAUSE:
OBD II System configuration.
CORRECTION:
When diagnosing the vehicles listed above, use the updated Tech-1A adapter as listed in this bulletin.
This bulletin is to inform you of the change in the Data Link Connector (DLC) for the vehicles listed above. The pin configuration on the DLC has been modified from a 12 pin to a 16 pin connection to conform to the OBD II (On-Board Diagnostics II) system requirements. As a result of this change, a new Tech-1A adapter is now available to adapt your Tech-1A to the updated connector. If your Tech-1A needs this new adapter, please use the part numbers as listed in this bulletin.
There are two versions of the Tech-1A: Version # 1 and Version # 2, as shown. When ordering parts for your Tech-1A, make sure that you order the correct parts for your particular version.
TECH-1A PARTS SUPPLY INFORMATION