Read Current Data
Read Current DataOPERATION
1) Using the Subaru Select Monitor, on the [[Main Menu]] display, select {Each System Check}.
2) On [[System Selection Menu]] display, select {Transmission Control System}.
3) After transmission type information pops up, select [OK].
4) On [[Transmission Diagnosis]] display, select {Current Data Display & Save}.
5) On [[Current Data Display & Save]] display, select {Normal sampling}.
6) Using the scroll key, scroll the display screen up or down until the desired data is shown.
^ The support data list is as follows.
NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".