Installation

Installation

1. Installation of transmission control computer ASSY
(1) Install the transmission control computer ASSY to the transmission control computer bracket with 2 nuts.
Standard value:T=7.5Nm {77kgf-cm} {5.5ft-lbf}
(2) Install the transmission control computer ASSY with 2 nuts.
Standard value:T=7.5Nm {77kgf-cm} {5.5ft-lbf}
(3) Connect the 2 connectors to the transmission control computer ASSY.
2. Installation of instrument panel under cover SUB-ASSY No.1
3. Installation of instrument side panel RH
4. Connection of battery ground terminal
5. Initialization when removing/installing battery terminals