Assembly

Assembly





1. Cam timing oil control valve ASSY installation (bank 2 exhaust side)
(1) Install the back-up ring to the cam timing oil control valve ASSY.

Captions in illustration





(2) Install a new O-ring to the cam timing oil control valve ASSY.
(3) Apply engine oil to the O-ring.





(4) Install the cam timing oil control valve ASSY with the two bolts.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}





2. Cam timing oil control valve ASSY installation (bank 2 intake side)
(1) Install the back-up ring to the cam timing oil control valve ASSY.

Captions in illustration





(2) Install a new O-ring to the cam timing oil control valve ASSY.
(3) Apply engine oil to the O-ring.





(4) Install the cam timing oil control valve ASSY with the two bolts.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}





3. Cam timing oil control valve ASSY installation (bank 1 exhaust side)
(1) Install the back-up ring to the cam timing oil control valve ASSY.

Captions in illustration





(2) Install a new O-ring to the cam timing oil control valve ASSY.
(3) Apply engine oil to the O-ring.





(4) Install the cam timing oil control valve ASSY with the two bolts.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}





4. Cam timing oil control valve ASSY installation (bank 1 intake side)
(1) Install the back-up ring to the cam timing oil control valve ASSY.

Captions in illustration





(2) Install a new O-ring to the cam timing oil control valve ASSY.
(3) Apply engine oil to the O-ring.





(4) Install the cam timing oil control valve ASSY with the two bolts.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}
5. Cam position sensor installation (bank 2 exhaust side)
(1) Install a new O-ring to the cam position sensor.
(2) Apply engine oil to the O-ring.





(3) Install the cam position sensor with the bolt.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}
6. Cam position sensor installation (bank 2 intake side)
(1) Install a new O-ring to the cam position sensor.
(2) Apply engine oil to the O-ring.





(3) Install the cam position sensor with the bolt.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}
7. Cam position sensor installation (bank 1 exhaust side)
(1) Install a new O-ring to the cam position sensor.
(2) Apply engine oil to the O-ring.





(3) Install the cam position sensor with the bolt.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}
8. Cam position sensor installation (bank 1 intake side)
(1) Install a new O-ring to the cam position sensor.
(2) Apply engine oil to the O-ring.





(3) Install the cam position sensor with the bolt.
Standard value:T=6.4Nm {65kgf-cm} {4.7ft-lbf}
9. Engine oil temperature sensor installation
(1) Install a new gasket to the engine oil temperature sensor.





(2) Install the engine oil temperature sensor.

Captions in illustration





Standard value:T=18Nm {184kgf-cm} {13.3ft-lbf}
10. Engine oil pressure switch ASSY installation
(1) Degrease the threaded portion of engine oil pressure switch ASSY.





(2) Apply THREE BOND 1324 to the threaded portion.

Captions in illustration





CAUTION:
Do not apply THREE BOND 1324 to the oil hole.





(3) Install the engine oil pressure switch ASSY.

Captions in illustration





Standard value:T=18Nm {184kgf-cm} {13.3ft-lbf}

CAUTION:
Do not start the engine within 1 hour after the assembly.

11. Oil filter union installation
12. Oil filter SUB-ASSY installation