Removal

Removal

1. Battery negative terminal disconnection





2. Air cleaner case SUB-ASSY removal
(1) Move the hose clip and disconnect the ventilation hose NO. 2.





(2) Disconnect the connector from the intake air flow meter SUBASSY.
(3) Release the clamp and disconnect the wiring harness from the air cleaner cap.





(4) Loosen the two hose clamps and remove the air cleaner duct and air intake boot.





(5) Remove the three bolts and remove the air cleaner case SUBASSY.
3. Front bumper cover removal
4. Engine under cover NO. 1 removal
5. Coolant (SUBARU Super Coolant) draining
6. Radiator outlet hose disconnection





7. Radiator reservoir tank ASSY removal
(1) Remove the two bolts and remove the radiator reservoir tank ASSY.





8. Air cleaner duct removal
(1) Remove the two bolts and remove the air cleaner duct.





9. Radiator cover plate removal
(1) Release the six clips and remove the radiator cover plate.
10. Water filler SUB-ASSY removal
(1) Disconnect the radiator cap hose.





(2) Move the two hose clamps and disconnect the radiator inlet hose and radiator hose NO. 1.

NOTE:
Since the hose has its proper installation position, mark the alignment mark before removing it.





(3) Remove the four bolts and remove the radiator cap stay.
11. Hood lock ASSY disconnection





12. Radiator support SUB-ASSY removal
(1) Remove the two lower bolts of radiator support SUB-ASSY.





(2) Remove the four bolts and remove the radiator support SUBASSY.





13. Cooler condenser ASSY disconnection
(1) Remove the bolt.





(2) Remove the bolt.





(3) Remove the bolt.





(4) Remove the bolt A.
Remove the bolt B and disconnect the cooler condenser ASSY from the radiator ASSY.
14. Fan shroud removal





15. Radiator ASSY removal
(1) Remove the two bolts and remove the radiator support bracket RH.





(2) Remove the two bolts and remove the radiator support bracket LH.





(3) Disconnect the ambient sensor connector.





(4) Remove the radiator ASSY while lifting the radiator outlet hose.

CAUTION:
Insert a cardboard, blanket, etc. between the radiator ASSY and cooler condenser ASSY to protect the cooler condenser ASSY.

Captions in illustration








(5) Remove the two radiator supports LWR.





16. Radiator hose NO. 1 removal
(1) Move the hose clamp and remove the radiator hose NO. 1 from the radiator ASSY.

Captions in illustration





NOTE:
Since the hose has its proper installation position, mark the alignment mark before removing it.





17. Radiator outlet hose removal
(1) Move the hose clamp and remove the radiator outlet hose.

Captions in illustration





NOTE:
Since the hose has its proper installation position, mark the alignment mark before removing it.





18. Radiator inlet hose removal
(1) Move the hose clamp and remove the radiator inlet hose from the radiator cap stay.

Captions in illustration





NOTE:
Since the hose has its proper installation position, mark the alignment mark before removing it.





19. Radiator gasket removal (for the upper side)
(1) Remove the radiator gasket.

Captions in illustration








20. Radiator gasket NO. 1 removal
(1) Remove the radiator gasket NO. 1.

Captions in illustration








21. Radiator gasket NO. 2 removal
(1) Remove the radiator gasket NO. 2.

Captions in illustration








22. Radiator gasket removal (for the lower side)
(1) Remove the radiator gasket.

Captions in illustration