Removal
Removal1. Air cleaner case SUB-ASSY removal
2. Front bumper cover removal
3. Air cleaner duct removal
4. Radiator cover plate removal
5. Radiator reservoir tank ASSY removal
6. Water filler SUB-ASSY removal
(1) Remove the four bolts and disconnect the water filler SUB-ASSY.
7. Hood lock ASSY disconnection
8. Radiator support SUB-ASSY removal
9. Fan shroud removal
(1) Remove the two clamps.
(2) Disconnect the connector for cooling fan and connector for cooling fan NO. 2.
Captions in illustration
(3) Put a mark on the sponge at the upper side of fan shroud and cut the sponge using scissors etc.
NOTE:
Cut on the line from the corner of radiator gasket to the edge of fan shroud.
Captions in illustration
(4) Release the two claws and disconnect the fan shroud from the radiator ASSY.
NOTE:
Insert a cardboard, blanket, etc. between the radiator ASSY and fan shroud to protect the radiator ASSY.
Captions in illustration
(5) Remove the fan shroud.
CAUTION:
^ Be careful not to damage the radiator outlet hose, discharge hose and A/C tube & accessory ASSY.
^ Be careful not to damage the radiator inlet hose, radiator hose NO. 1 and water filler SUB-ASSY.
10. Fan removal
(1) Remove the nut and remove the fan.
11. Fan NO. 2 removal
(1) Remove the nut and remove the fan NO. 2.
12. Cooling fan motor removal
(1) Release the clamp of connector on the cooling fan side and disconnect the wiring harness from the cooling fan motor NO. 2.
(2) Remove the three screws and remove the cooling fan motor.
13. Cooling fan motor NO. 2 removal
(1) Remove the three screws and remove the cooling fan motor NO. 2.