Rear Gate Latch and Actuator Assembly
Rear Gate Latch and Actuator AssemblyINSPECTION
1. REAR GATE LATCH
Check if the rear gate latch operates normally.
- If latch deformation, abnormal wear, or unsmooth lock operation is observed, replace the rear gate latch & actuator assembly.
2. LOCK ACTUATOR
1. Disconnect the rear gate latch & actuator assembly connector.
2. Check the door lock operation by applying battery voltage between the terminals of rear gate latch & actuator.
Preparation tool: Circuit tester
3. If the actuator does not operate normally, replace the rear gate latch & actuator assembly.