Overhaul
IntercoolerDISASSEMBLY
1. Remove the intercooler duct from the intercooler.
2. Remove the air by-pass valve from intercooler.
3. Remove the intake duct from intercooler duct.
ASSEMBLY
1. Install the intake duct to the intercooler duct.
Tightening torque: 3 N.m (0.3 kgf-m, 2.2 ft-lb)
2. Install the air by-pass valve to the intercooler.
NOTE: Use a new gasket.
Tightening torque: 16 N.m (1.6 kgf-m, 11.8 ft-lb)
3. Install the intercooler duct to the intercooler.
NOTE: Use a new gasket.
Tightening torque: 16 N.m (1.6 kgf-m, 11.8 ft-lb)
