6MT

REMOVAL

PITCHING STOPPER

1) Disconnect the ground cable from battery.
2) Remove the intercooler.
3) Remove the pitching stopper.





CROSSMEMBER AND CUSHION RUBBER

1) Disconnect the ground cable from battery.
2) Lift up the vehicle.
3) Remove the transmission under cover.
4) Remove the center exhaust pipe.
5) Remove the rear exhaust pipe and muffler.
6) Remove the heat shield cover.
7) Set the transmission jack under the transmission body.

CAUTION:
Always support the transmission case with a transmission jack.

8) Remove the rear crossmember.





9) Remove the transmission cushion rubber.