Leak Detection Solenoid: Service and Repair

PRESSURE CONTROL SOLENOID VALVE ASSEMBLY

REMOVAL
1. Disconnect the ground cable from battery.






2. Lift up the vehicle.
3. Disconnect the connector (A) and evaporation hose (B) from the pressure control solenoid valve assembly.
4. Remove the nut (C) securing the bracket to the fuel tank and remove the pressure control solenoid valve assembly.






INSTALLATION

Install in the reverse order of removal.

Tightening torque: 2.5 N.m (0.3 kgf-m, 1.8 ft-lb)