With VDC
Warning Light Illumination PatternINSPECTION
NOTE:
^ The illumination pattern above shows proper condition.
^ While hill start assist is OFF, hill start assist warning light (15) always illuminates to indicate that hill start assist does not operate. (6MT model only)
1) When warning lights or indicator lights do not illuminate in accordance with this illumination pattern, there must be an electrical malfunction.
2) When warning lights or indicator lights remain constantly OFF, check the combination meter circuit or CAN communication circuit. VDC Warning Light & VDC Multi Mode Indicator Light and VDC Indicator Light Do Not Come on ABS Warning Light Does Not Come on Hill Start Assist Warning Light Does Not Come on
3) When ABS warning light does not go off, check the combination meter circuit or CAN communication circuit. ABS Warning Light Does Not GO Off
4) When hill start assist warning light does not go off, check the status of hill start assist OFF mode setting, combination meter circuit, or CAN communication circuit. Hill Start Assist Warning Light Does Not GO Off
5) When the VDC indicator light, VDC warning light & VDC multi mode indicator light (6MT model), or VDC warning light & VDC OFF indicator light (5MT model) does not go off, check the combination meter circuit or CAN communication circuit. VDC Indicator Light Does Not GO Off VDC Warning Light & VDC Multi Mode Indicator Light Do Not GO Off VDC Warning Light and VDC Off Indicator Light Do Not GO Off
NOTE:
^ Even though the ABS warning light does not go off after 1 seconds from ABS warning light illumination, the ABS system operates normally when the warning light goes off while driving at approximately 12 km/h (7 MPH). However, the ABS system does not work while the ABS warning light is illuminated.
^ If the vehicle is parked under low temperature for a specified time, it may take several minutes before VDC warning light & VDC multi mode indicator light (6MT model) or VDC warning light & VDC OFF indicator light (5MT model) goes off. This is not defective because it is resulted from low engine coolant temperature.
^ With the vehicle jack-up/lift-up or set on free rollers, when the wheels lock or spin after starting the engine, ABS warning light and VDC warning light & VDC multi mode indicator light (6MT model) or VDC warning light & VDC OFF indicator light (5MT model) may illuminate because VDCCM&H/U detects the abnormal conditions from ABS wheel speed sensors. In this case, this is not a malfunction. Perform the Clear Memory Mode. Clear Memory Mode
5) When the VDC indicator light, VDC warning light & VDC multi mode indicator light (6MT model), or VDC warning light & VDC OFF indicator light (5MT model) does not go off, check the combination meter circuit or CAN communication circuit. VDC Indicator Light Does Not GO Off VDC Warning Light & VDC Multi Mode Indicator Light Do Not GO Off VDC Warning Light and VDC Off Indicator Light Do Not GO Off
NOTE:
^ Even though the ABS warning light does not go off after 1 seconds from ABS warning light illumination, the ABS system operates normally when the warning light goes off while driving at approximately 12 km/h (7 MPH). However, the ABS system does not work while the ABS warning light is illuminated.
^ If the vehicle is parked under low temperature for a specified time, it may take several minutes before VDC warning light & VDC multi mode indicator light (6MT model) or VDC warning light & VDC OFF indicator light (5MT model) goes off. This is not defective because it is resulted from low engine coolant temperature.
^ With the vehicle jack-up/lift-up or set on free rollers, when the wheels lock or spin after starting the engine, ABS warning light and VDC warning light & VDC multi mode indicator light (6MT model) or VDC warning light & VDC OFF indicator light (5MT model) may illuminate because VDCCM&H/U detects the abnormal conditions from ABS wheel speed sensors. In this case, this is not a malfunction. Perform the Clear Memory Mode. Clear Memory Mode
6) Warning light illumination pattern at VDC multi mode change (6MT model only)
If the VDC warning light & VDC multi mode indicator light illumination pattern when the VDC mode change switch is operated do not match the following, check the VDC mode change switch circuit, CAN communication circuit or combination meter circuit. VDC Mode Does Not Change
7) Warning light illumination pattern at hill start assist OFF mode change (6MT model only)
When the VDC mode change switch is kept pressing, VDC warning light & VDC multi mode indicator light illuminates in green at first, then turns yellow, and then goes off in approx. 8 seconds. If the switch is released in 5 seconds after the light goes off then pressed again in 1 seconds, hill start assist warning light illuminates then mode is changed to hill start assist OFF mode. If the hill start assist function ON/OFF does not change, check VDC mode change switch circuit, CAN communication circuit or combination meter circuit. VDC Mode Does Not Change
NOTE:
^ Hill start assist warning light always illuminates to inform that the hill start assist does not operate during hill start assist OFF mode.
^ For procedure of changing hill start assist function ON/OFF, Description and Operation