Blower Motor Unit Assembly
Blower Motor Unit AssemblyREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the instrument panel lower.
3. Remove the protect cover of ECM.
4. Disconnect the connectors of the intake door actuator and blower motor.
5. Remove the relay holder.
6. Loosen the bolt and nut to remove blower motor unit assembly.
INSTALLATION
Install in the reverse order of removal.
BLOWER MOTOR UNIT
Tightening torque N.m (kgf.m, ft.lb)
T: 7.5 (0.76, 5.5)