Sunroof Assembly

SUNROOF ASSEMBLY

REMOVAL
1. Disconnect the ground cable from battery.
2. Remove the roof trim.
3. Remove the sunroof lid.
4. Disconnect the harness connector.
5. Remove the bolts and then move the curtain airbag module.
6. Remove the bolts and then remove the frame bracket.







7. Remove the four drain tubes (A) from the sunroof frame.
8. Remove the nuts and bolts to remove the sunroof frame.







INSTALLATION

CAUTION: Be careful not to snag the harness.

Install in the reverse order of removal.

NOTE:
- Be sure to connect the harness connector.
- When installing the drain tube, insert it securely into drain pipe.

Length A: 15 mm (0.59 in) or more