A/T Fluid Replacement

REPLACEMENT
1) Lift up the vehicle.
2) Remove the drain plug (ATF) and completely drain the ATF.

CAUTION:
Immediately after the vehicle has been running or after idling for a long time, the ATF will be hot. Be careful not to receive burns.

3) Check the ATF condition.
4) Tighten the drain plug (ATF).

NOTE:
Use a new gasket.





5) Lower the vehicle.
6) Pour ATF from the oil charge pipe.
Recommended fluid.
Ref, to HYDRAULIC CONTROL AND LUBRICATION, SPECIFICATION, General Description.

CAUTION:
Be sure to use the recommended or equivalent ATF. Using material except recommended one or substitute would cause trouble.

Capacity.
Fill with the same amount of ATF that was drained from drain plug hole.

Capacity when transmission is overhauled.
9.3-9.6 l
(9.8 - 10.1 US qt, 8.2 - 8.4 Imp qt)

7) Bleed the air of control valve.
8) Check the level and leaks of ATF.