Radiator Main Fan

Radiator Main Fan and Fan Motor








Radiator Main Fan and Fan Motor

REMOVAL
1) Set the vehicle on a lift.
2) Remove the collector cover.
3) Disconnect the ground cable from battery.





4) Lift up the vehicle.
5) Remove the under cover.
6) Disconnect the main fan motor connector (A).





7) Remove the heat shield cover from radiator.





8) Remove the ATF hose from the hose clip of the radiator main fan motor assembly.





9) Lower the vehicle.
10) Remove the air intake duct (rear).
11) Remove the reservoir tank.
12) Remove the bolts that secure the radiator main fan motor assembly and the over flow pipe.





13) Remove the radiator main fan motor assembly from the upper side of the vehicle.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Check if the radiator hose and the over flow hose are properly connected.








DISASSEMBLY
1) Remove the clip which secures the main fan motor connector onto the radiator main fan shroud.
2) Remove the radiator main fan from the main fan motor.





3) Remove the main fan motor from the radiator main fan shroud.





ASSEMBLY
Assemble in the reverse order of disassembly.








INSPECTION
Check that the radiator main fan, radiator main fan shroud and main fan motor do not have deformation, cracks or damage.