Front Fender: Service and Repair

FRONT FENDER

REMOVAL

1. FRONT FENDER PANEL

1. Disconnect the ground cable from battery.
2. Remove the side sill spoilers.
3. Remove the front bumper face.
4. Remove the headlight assembly.
5. Remove the mud guard.
6. Detach the tabs and remove the cowl panel, side.







1. Detach tabs (A), (B), and (C) from the vehicle exterior.
2. Detach tabs (D) and (E).

7. Remove the bolt, and remove the front fender panel.







2. COWL SIDE STAY
For operation procedures of the cowl side stay, refer to the performance stay items.

INSTALLATION

CAUTION:
- When replace double sided tape with new tape.
- After attaching the front fender panel, always perform headlight beam level adjustment.

Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)

NOTE: Install while paying attention to maintaining a uniform clearance around the front fender panel. For the dimension of clearances, refer to "SPECIFICATION" in "General Description".