Rear Quarter Trim

REAR QUARTER TRIM

REMOVAL
1. Remove the rear seat.
2. Remove the seat belt lower anchor bolt.







3. Remove the cap (B) on the upper side of the rear quarter pillar front trim, and remove the bolt inside.







NOTE: Remove the molding (A), and remove the cap from the backside of pillar trim not to damage the trim.

4. Remove the side belt cover (C).
5. Remove center belt cover (D), and remove the anchor bolt inside.







6. Remove the clips and screws, and remove the rear quarter upper trim.







7. Remove the luggage room end cover.







8. Remove the bolts, and remove the rear quarter lower trim.







INSTALLATION
Install in the reverse order of removal.

Tightening torque
Refer to "COMPONENT" of "General Description".
Rear quarter upper trim: [Ref. to INNER TRIM, COMPONENT, General Description.]
Seat belt anchor: [Ref. to REAR SEAT BELT, COMPONENT, General Description.]