Oil Temperature Sensor For ECM: Service and Repair
Oil Temperature SensorREMOVAL
1. Disconnect tine ground cable from the battery.
2. Remove the air intake chamber.
3. Remove the engine harness connector from the bracket.
4. Disconnect the connector from the oil temperature sensor.
5. Remove the oil temperature sensor.
INSTALLATION
Install in the reverse order of removal.
NOTE: Apply liquid gasket to the oil temperature sensor threads.
Liquid gasket: THREE BOND 1324 (Part No. 004403042) or equivalent
Tightening torque: 18 N.m (1.8 kgf.m, 13.3 ft.lb)